6: Controller sixth generation product

   4: Controller version number

   4:4 axis card

   X: Display type

   4:7 inch touch screen)

   G: Standard function

Power: +24V, greater than 2A

Temperature: temperature 0~50 °C, humidity is not more than 70%

RDC644XG system is a new generation system for control of laser engraving and cutting, which is developed by RD technology, Ltd.

High hardware stability, high voltage or static electricity rejection, and friendly 3.5TFT man-machine display.

This system is provided with stronger software function including perfect 4-axis motion control function, large-capacity file storage, two-channel adjustable digits laser power control interface, USB driver of stronger compatibility,multi-channel general/special IO control, and, this system can communicate with PC by USB2.0 or Ethernet, and the communication mode is automatically checked by the system.

• Digital laser control signals:

(1) TTL level output, 50 mA,drive capability(can set enable signal polarity in software)
(2) PWM frequency 2K-50K for adjustable
(3) PWM duty ratio is 1% ~ 99%, adjustable
(4) PWM value is up to 5.0 V

• Motor control signal:common-anode output, drive capability 20 mA. Motor control pulse frequency: Max.500KHZ
• USB: Max. transmission rate 12M bps; The longest distance is 5 meters.
• Network:Max. transmission rate is100M; Max. transmission distance is 200M.
• Interpolation:Linear/circular arc/B spline, accuracy + / – 0.5 pulse
• Output: 4-channel, photoelectric isolated OC gate output, the max. drive capability 500mA drive capability (with follow-current protection).
• Input:4-channel, photoelectric isolated input, compatible with 5V/ 12V / 24V logic level